Dongguan Hongshun Automation Equipment Co., Ltd.
Add to Cart
Sulfuric Acid Anodizing Setup for Standard Anodization
Anodizing Setup Overview:
The sulfuric acid anodizing setup is a reliable choice for standard anodization. It offers stable anodizing conditions, producing consistent oxide layers. The adjustable parameters allow customization for different materials and requirements. With a simple operation interface, it’s easy to use for both small - scale and large - scale production, providing cost - effective anodizing solutions.
Partial parameter description of Anodizing Setup:
Production line foundation and plant conditions
² The functional tank part of the production line shall be load-bearing according to the standard plant floor
² The auxiliary equipment is installed in the placement area isolated from the production line
² The production line shall be treated with anti-corrosion according to the standard
For a complete technical solution of Anodizing Setup, please contact me. We will customize the design based on your product technical requirements and factory layout.
Basic process flow Of Anodizing Setup:
Feed material → 1 Chemical degreasing → 2 Water washing → 3 Alkali etching → 4 Water washing → 5 Water washing → 6 Acid washing → 7 Water washing → 8 Water washing → 9 Anodizing → 10 Anodizing → 11 Anodizing → 12 Water washing → 13 Water washing → 14 Coloring → 15 Water washing → 16 Coloring → 17 Water washing → 18 Coloring → 19 Water washing → 20 Coloring → 21 Water washing → Unloading
Working conditions Of Anodizing Setup:
| Environmental temperature | 0℃~45℃ is most suitable |
| Relative humidity | less than or equal to 90% |
| Water pressure | 0.3Mpa |
| Source of steam | 0.2~0.5Mpa |
| Main power supply | 380±10%/50HZ,25V-3000A rectifier,Refrigerator 22.5KW,Filter 8KW |
Our typical customers:
Installation and training Of Anodizing Setup:
1. Installation
1) The seller shall provide all details of the equipment installation to the user in order to prepare the installation site.
2) The seller shall install and debug the equipment at the user's factory site.
2. Training
During the installation, the seller provides on-site training for plant operators, including normal operation, maintenance, analysis of operational problems and emergency procedures.